skip to main content

Thermal and Ash Characterization of Indonesian Bamboo and Its Potential for Solid Fuel and Waste Valorization

1Chemical Engineering Program, Faculty of Industrial Technology, Bandung Institute of Technology, INDONESIA, Indonesia

2Department of Chemical Engineering, Faculty of Engineering, Diponegoro University, INDONESIA, Indonesia

3Chemical Engineering Program, Faculty of Industrial Technology, Bandung Institute of Technology,, Indonesia

Published: 15 Jul 2016.
Editor(s): H Hadiyanto
Open Access Copyright (c) 2016 International Journal of Renewable Energy Development

Citation Format:
Abstract

Bamboo has been widely used in Indonesia for construction, handicrafts, furniture and other uses. However, the use of bamboo as a biomass for renewable energy source has not been extensively explored. This paper describes the thermal and ash characterization of three bamboo species found in Indonesia, i.e. Gigantochloa apus, Gigantochloa levis and Gigantochloa atroviolacea. Characterization of bamboo properties as a solid fuel includes proximate and ultimate analyses, calorific value measurement and thermogravimetric analysis. Ash characterization includes oxide composition analysis and phase analysis by X-Ray diffraction. The selected bamboo species have calorific value comparable with wood with low nitrogen and sulphur contents, indicating that they can be used as renewable energy sources. Bamboo ash contains high silicon so that bamboo ash has potential to be used further as building materials or engineering purposes. Ash composition analysis also indicates high alkali that can cause ash sintering and slag formation in combustion process. This implies that the combustion of bamboo requires the use of additives to reduce the risk of ash sintering and slag formation.

 

Article History: Received May 15, 2016; Received in revised form July 2nd, 2016; Accepted July 14th, 2016; Available online

How to Cite This Article: Purbasari, A., Samadhi, T.W. & Bindar, Y. (2016) Thermal and Ash Characterization of Indonesian Bamboo and its Potential for Solid Fuel and Waste Valorization. Int. Journal of Renewable Energy Development, 5(2), 95-100.

http://dx.doi.org/10.14710/ijred.5.2.96-100

 

Fulltext View|Download

Article Metrics:

  1. Byrne, C.E. & Nagle, D.C. (1997) Carbonization of Wood for Advanced Materials Applications. Carbon, 35(2), 259-266
  2. Cahyono, T.D., Coto, Z. & Febrianto, F. (2008) Thermophisic Aspect of Wood Utilization as Substitution Fuel at Cement Factory. Jurnal Ilmu dan Teknologi Hasil Hutan, 1(1), 45-53
  3. Demirbas, A. (2005) Potential Applications of Renewable Energy Sources, Biomass Combustion Problems in Boiler Power Systems and Combustion Related Environmental Issues. Progress in Energy and Combustion Science, 31, 171-192
  4. Engler, B., Schoenherr, S., Zhong, Z. & Becker, G. (2012) Suitability of Bamboo as An Energy Resource: Analysis of Bamboo Combustion Values Dependent on The Culm’s Age. International Journal of Forest Engineering, 23(2), 114-121
  5. Jenkins, B.M., Baxter, L.L., Miles J.T.R. & Miles, T.R. (1998) Combustion Properties of Biomass. Fuel Processing Technology, 54, 17-46
  6. Kleinhenz, V., Midmore, D.J. (2001) Aspects of bamboo agronomy. Advances in Agronomy, 74, 99-145
  7. Konsomboon, S., Pipatmanomai, S., Madhiyanon, T. & Tia, S. (2011) Effect of Kaolin Addition on Ash Characteristics of Palm Empty Fruit Bunch (EFB) Upon Combustion. Applied Energy, 88, 298-305
  8. Kumar, R. & Chandrashekar, N. (2014) Fuel Properties and Combustion Characteristics of Some Promising Bamboo Species in India. Journal of Forestry Research, 25(2), 471-476
  9. Llorente, M.J.F., Arocas, P.D., Nebot, L.G. & Garcia, J.E.C. (2008) The Effect of The Addition of Chemical Materials on The Sintering of Biomass Ash. Fuel, 87(12), 2651-2658
  10. McKendry, P. (2002a) Energy Production from Biomass (Part 1): Overview of Biomass. Bioresource Technology, 83, 37-46
  11. McKendry, P. (2002b) Energy Production from Biomass (Part 2): Conversion Technologies. Bioresource Technology, 83, 47-54
  12. Rajamma, R., Ball, R.J., Tarelho, L.A.C., Allen, G.C., Labrincha, J.A. & Ferreira, V.M. (2009) Characterisation and use of biomass fly ash in cement-based materials. Journal of Hazardous Materials, 172, 1049-1060
  13. Scurlock, J.M.O., Dayton, D.C. & Hames, B. (2000) Bamboo: An Overlooked Biomass Resource? Biomass and Bioenergy, 19, 229-244
  14. Vassilev, S.V., Baxter, D., Andersen, L.K., & Vassileva, C.G. (2013) An Overview of The Composition and Application of Biomass Ash. Part 2. Potential Utilisation, Technological and Ecological Advantages and Challenges. Fuel, 105, 19–39
  15. Yudodibroto, H. (1987) Bamboo Research in Indonesia. Proceedings of the International Bamboo Workshop, Hangzhou, R.R.C., Rao, A.N., G. Dhanarajan, G., Sastry, C.B., eds., IDRC, 33-44

Last update:

  1. Ash Fusion Characteristics and Transformation Behaviors during Bamboo Combustion in Comparison with Straw and Poplar

    Youjian Zhu, Junhao Hu, Wei Yang, Wennan Zhang, Kuo Zeng, Haiping Yang, Shenglei Du, Hanping Chen. Energy & Fuels, 32 (4), 2018. doi: 10.1021/acs.energyfuels.8b00371
  2. Simulation Study of Bamboo Leaves Valorization to Small-Scale Electricity and Bio-silica Using ASPEN PLUS

    Yusrin Ramli, Soen Steven, Elvi Restiawaty, Yazid Bindar. BioEnergy Research, 15 (4), 2022. doi: 10.1007/s12155-022-10403-7
  3. Chemical Modification of Combusted Coal Gangue for U(VI) Adsorption: Towards a Waste Control by Waste Strategy

    Yuan Gao, Jiandong Huang, Meng Li, Zhongran Dai, Rongli Jiang, Jixiong Zhang. Sustainability, 13 (15), 2021. doi: 10.3390/su13158421
  4. The status of bamboo research and development for sustainable use in Indonesia: A systematic literature review

    D Ekawati, L Karlinasari, R Soekmadi, M Machfud. IOP Conference Series: Earth and Environmental Science, 1109 (1), 2022. doi: 10.1088/1755-1315/1109/1/012100
  5. CO2activation of bamboo residue after hydrothermal treatment and performance as an EDLC electrode

    Duy Anh Khuong, Hong Nam Nguyen, Toshiki Tsubota. RSC Advances, 11 (16), 2021. doi: 10.1039/D1RA00124H
  6. CO2 activation of bamboo residue after hydrothermal treatment and performance as an EDLC electrode

    Duy Anh Khuong, Hong Nam Nguyen, Toshiki Tsubota. RSC Advances, 11 (16), 2021. doi: 10.1039/D1RA00124H
  7. Characterization and optimization of alkali-treated yushania alpina bamboo fiber properties: case study of ethiopia species

    Dawit Tessema Ebissa, Tamrat Tesfaye, Delele Worku, David Wood. SN Applied Sciences, 4 (3), 2022. doi: 10.1007/s42452-022-04965-6
  8. Chemical, Physical, and Mechanical Properties of Belangke Bamboo (Gigantochloa pruriens) and Its Application as a Reinforcing Material in Particleboard Manufacturing

    Apri Heri Iswanto, Elvara Windra Madyaratri, Nicko Septuari Hutabarat, Eka Rahman Zunaedi, Atmawi Darwis, Wahyu Hidayat, Arida Susilowati, Danang Sudarwoko Adi, Muhammad Adly Rahandi Lubis, Tito Sucipto, Widya Fatriasari, Petar Antov, Viktor Savov, Lee Seng Hua. Polymers, 14 (15), 2022. doi: 10.3390/polym14153111
  9. Bamboo and Sustainable Construction

    Lucas Henrique Pereira Silva, Fábio Friol Guedes de Paiva, Jacqueline Roberta Tamashiro, Maryane Pipino Beraldo de Almeida, Vitor Peixoto Klienchen de Maria, Vivian Monise Alves de Oliveira, Angela Kinoshita. Environmental Footprints and Eco-design of Products and Processes, 2023. doi: 10.1007/978-981-99-0232-3_1
  10. Physico-thermal and emission properties of tissue cultured clone from Bambusa balcoaa (Beema bamboo) and Oxytenanthera abyssinica as sustainable solid biofuels

    Kwadwo Boakye Boadu, Michael Ansong, Rogerson Anokye, Kelvin Offeh-Gyimah, Enoch Amoah, Nor Adilla Rashidi. PLOS ONE, 17 (12), 2022. doi: 10.1371/journal.pone.0279586
  11. Thermal Characteristics of Geopolymer from Co-combustion Residuals of Bamboo and Kaolin

    A Purbasari, T W Samadhi, Y Bindar, W Wulandari. Journal of Physics: Conference Series, 1295 (1), 2019. doi: 10.1088/1742-6596/1295/1/012069

Last update: 2024-10-10 11:19:26

  1. Ash Fusion Characteristics and Transformation Behaviors during Bamboo Combustion in Comparison with Straw and Poplar

    Youjian Zhu, Junhao Hu, Wei Yang, Wennan Zhang, Kuo Zeng, Haiping Yang, Shenglei Du, Hanping Chen. Energy & Fuels, 32 (4), 2018. doi: 10.1021/acs.energyfuels.8b00371
  2. Characterization of agro-waste and weed biomass to assess their potential for bioenergy production

    Deb U.. International Journal of Renewable Energy Development, 8 (3), 2019. doi: 10.14710/ijred.8.3.243-251
  3. Geopolymer preparation from bamboo ash containing kaolin as ash fusion control agent

    Samadhi T.W.. Materials Science Forum, 127 , 2020. doi: 10.4028/www.scientific.net/MSF.982.189
  4. Synthesis and characterization of bamboo ash based geopolymer cement

    Purbasari A.. Advanced Science Letters, 23 (6), 2017. doi: 10.1166/asl.2017.8813
  5. Study on Fusion Characteristics and High-Temperature Transformation Behavior of Bamboo Ash

    Liu H.. Ranshao Kexue Yu Jishu/Journal of Combustion Science and Technology, 26 (1), 2020. doi: 10.11715/rskxjs.R201903002
  6. The effect of alkaline activator types on strength and microstructural properties of geopolymer from co-combustion residuals of bamboo and kaolin

    Purbasari A.. Indonesian Journal of Chemistry, 18 (3), 2018. doi: 10.22146/ijc.26534
  7. Sulfuric acid resistance of geopolymer mortars from co-combustion residuals of bamboo and kaolin

    Purbasari A.. ASEAN Journal of Chemical Engineering, 18 (2), 2018.
  8. Thermal Characteristics of Geopolymer from Co-combustion Residuals of Bamboo and Kaolin

    A Purbasari, T W Samadhi, Y Bindar, W Wulandari. Journal of Physics: Conference Series, 1295 (1), 2019. doi: 10.1088/1742-6596/1295/1/012069