DOI: https://doi.org/10.61435/ijred.2024.60089

Removal of sulphur and nitrogen compounds from model fuel by adsorption of modified activated carbon

1Sonophotochemistry Research Group, Faculty of Science and Natural Resources, Universiti Malaysia Sabah (UMS), 88400 Kota Kinabalu, Sabah, Malaysia

2Industrial Chemistry Programme, Faculty of Science and Natural Resources, Universiti Malaysia Sabah (UMS), 88400 Kota Kinabalu, Sabah, Malaysia

3Energy and Materials Research Group, Faculty of Engineering, Universiti Malaysia Sabah (UMS), 88400 Kota Kinabalu, Sabah, Malaysia

4 Chemical Engineering Programme, Faculty of Engineering, Universiti Malaysia Sabah, 88400 Kota Kinabalu, Sabah, Malaysia

View all affiliations
Received: 16 Jan 2024; Revised: 8 Apr 2024; Accepted: 15 Jun 2024; Available online: 5 Aug 2024; Published: 1 Sep 2024.
Editor(s): H Hadiyanto
Open Access Copyright (c) 2024 The Author(s). Published by Centre of Biomass and Renewable Energy (CBIORE)
Creative Commons License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Citation Format:
Abstract
This study aimed to achieve the highest percentage removal of dibenzothiophene (DBT), quinoline (QUI), and indole (IND) adsorbed by double-impregnated modified activated carbon (MAC). Modification of commercial activated carbon (AC) by sulphuric acid (H2SO4) of 15%, 30%, 45%, 60%, and 75% w/v followed by subsequent 1 zinc chloride (ZnCl2): 1 AC impregnation ratio and activated at 500 oC in a muffle furnace under self-generated atmosphere for an hour. The determination of optimized MAC was identified through the highest removal rate of DBT, QUI, and IND from adsorption experiments which were analysed using an ultraviolet-visible (UV-Vis) spectrophotometer. It was found that DBT and IND showed a removal high percentage of up to 86.23% and 82.77% respectively by using 75% H2SO4 with ZnCl2 MAC. Meanwhile, QUI favoured 30% H2SO4 with ZnCl2 MAC with a removal percentage of 33.17% which was still higher than unmodified AC. Physical and chemical properties such as the morphological structure, elemental analysis, porosity, pore size, surface functional group, percentage yield, pH, bulk density, content, ash content, and iodine number were studied for the optimized MAC. Scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) spectroscopy and Fourier transform infrared spectroscopy (FTIR) were used to characterize the MAC. Both MACs showed high percentage yields of 72.08% and 71.13% for 30% and 75% H2SO4 and ZnCl2 MAC respectively. Meanwhile, the pH was between the ranges of 5.36-5.53 for both MACs. Bulk densities were also favourable while the moisture and ash content were within acceptable limits. Iodine numbers for 30% and 75% H2SO4 and ZnCl2 MAC were 857 and 861 mg/g respectively, hence indicating that the MAC achieved high porosity and good adsorption performance. Langmuir, Freundlich, and Temkin adsorption isotherm models as well as pseudo-first order (PFO) and pseudo-second order (PSO) kinetic models were considered for understanding the adsorption mechanisms. The study revealed that DBT, QUI, and IND removal processes, followed the Langmuir adsorption isotherm model with correlation coefficients, R2 of 0.9905, 0.9791, and 0.9964 respectively. Moreover, the adsorption kinetic data of DBT, QUI, and IND provided a better fitting to the PSO kinetic model with R2 of 0.9992, 0.9987, and 0.9998 respectively. According to the Langmuir isotherm model and PSO kinetic model, the adsorption mechanisms of DBT QUI and IND were chemisorbed under monolayer formations.
Fulltext View|Download
Keywords: sulphur-containing compounds; nitrogen containing compounds; activated carbon; desulfurization; denitrogenation; adsorption
Funding: Research Management Center of Universiti Malaysia Sabah

Article Metrics:

Article Info
Section: Original Research Article
Language : EN
Recent articles
Energy efficient design of rural prefabricated buildings based on ANN and NSGA-II Optimizing aeration rates via bio-methane potential test for enhanced biodrying efficiency of refuse-derived fuel-3 Exploring the impact of financial development on renewable energy consumption within the renewable energy-environmental Kuznets curve framework in Sub-Saharan Africa Energy retrofit and climate adaptive design of dwellings in the hot arid climate: Trends and future challenges More recent articles
Most cited articles
Solmap: Project In India's Solar Resource Assessment The Effects of Different Roughness Configurations on Aerodynamic Performance of Wind Turbine Airfoil and Blade 2D Numerical Simulation and Sensitive Analysis of H-Darrieus Wind Turbine Biodiesel Production from Kapok (Ceiba pentandra) Seed Oil using Naturally Alkaline Catalyst as an Effort of Green Energy and Technology Potency of Microalgae as Biodiesel Source in Indonesia More cited articles
  1. Achaw, O. W. (2012) A study of the porosity of activated carbons using the scanning electron microscope. Scanning Electron Microscopy, InTech. http://dx.doi.org/10.5772/36337
  2. Ahmed, I., Hasan, Z., Khan, N. A., & Jhung, S. H. (2013). Adsorptive denitrogenation of model fuels with porous metal-organic frameworks (MOFs): Effect of acidity and basicity of MOFs. Applied Catalysis B: Environmental, 129, 123-129. https://doi.org/10.1016/j.apcatb.2012.09.020
  3. Akpa, J. G., & Dagde, K. K., (2018). Effect of activation method and agent on the characterization of prewinkle shell activated carbon. Chemical and Process Engineering Research, 56, 24-36. https://www.iiste.org/Journals/index.php/CPER/article/view/41379/42608
  4. Almarri, M., Ma, X., & Song, C. (2009). Selective adsorption for removal of nitrogen compounds from liquid hydrocarbon streams over carbon- and alumina-based adsorbents. Industrial and Engineering Chemistry Research, 48(2), 951-960. https://doi.org/10.1021/ie801010w
  5. Alves, G. G. (2019). Removal of quinoline from oily wastewater using biochars prepared from compost. M. Sc. Thesis, Chemical Engineering, School of Technology and Management Polytechnic Institute of Bragança. https://bibliotecadigital.ipb.pt/bitstream/10198/24011/1/Alves_Giovanna.pdf
  6. Amin, M. T., Alazba, A. A., & Shafiq, M. (2015). Adsorptive removal of reactive black 5 from wastewater using bentonite clay: Isotherms, kinetics and thermodynamics. Sustainability), 7(11), 15302-15318. https://doi.org/10.3390/su71115302
  7. Angin, D. (2014). Production and characterization of activated carbon from sour cherry stones by zinc chloride. Fuel, 115, 804-811. https://doi.org/10.1016/j.fuel.2013.04.060
  8. Anisuzzaman, S. M., & Kamarulzaman, S. (2021). Removal of nitrogen containing compounds from fuel using modified activated carbon. Transactions on Science and Technology, 8(1), 38-44. https://tost.unise.org/pdfs/vol8/no1/ToST-8x1x38-44xOA.html
  9. Awe, A. A., Opeolu, B. O., Fatoki, O. S., Ayanda, O. S., Jackson, V. A., & Snyman, R. (2020). Preparation and characterisation of activated carbon from Vitis vinifera leaf litter and its adsorption performance for aqueous phenanthrene. Applied Biological Chemistry, 63(1). 1-17. https://doi.org/10.1186/s13765-020-00494-1
  10. Ayawei, N., Ebelegi, A. N., & Wankasi, D. (2017). Modelling and interpretation of adsorption isotherms. Journal of Chemistry, 2017 (3039817), 1-11. https://doi.org/10.1155/2017/3039817
  11. Bouchemal, N., Belhachemi, M., Merzougui, Z., & Addoun, F. (2009). The effect of temperature and impregnation ratio on the active carbon porosity. Desalination and Water Treatment, 10, 115-120. https://doi.org/10.5004/dwt.2009.828
  12. Chilev, C. (2017) A New Procedure for Porous Material Characterization. International Journal of Science, Technology and Society, 5(4), 131. https://doi.org/10.11648/j.ijsts.20170504.22
  13. Dagde, K. K. (2018) Biosorption of crude oil spill using groundnut husks and plantain peels as adsorbents. Advances in Chemical Engineering and Science, 8, 161-175. https://www.scirp.org/journal/paperinformation.aspx?paperid=86190
  14. Dehghan, R., & Anbia, M. (2017). Zeolites for adsorptive desulfurization from fuels: A review. Fuel Processing Technology, 167, 99-116. https://www.sciencedirect.com/science/article/abs/pii/S0378382017301637
  15. Desta, M. B. (2013). Batch sorption experiments: Langmuir and freundlich isotherm studies for the adsorption of textile metal ions onto teff straw (Eragrostis tef) agricultural waste. Journal of Thermodynamics, 2013 (375830), 1-6. https://doi.org/10.1155/2013/375830
  16. Efeovbokhan, V. E., Alagbe, E. E., Odika, B., Babalola, R., Oladimeji, T. E., Abatan, O. G., & Yusuf, E. O. (2019). Preparation and characterization of activated carbon from plantain peel and coconut shell using biological activators. Journal of Physics: Conference Series, 1378(3), 1-14. https://doi.org/10.1088/1742-6596/1378/3/032035
  17. Fayazi, M., Taher, M. A., Afzali, D., & Mostafavi, A. (2015). Removal of dibenzothiophene using activated carbon/γ-Fe2O3 nano-composite: Kinetic and thermodynamic investigation of the removal process. Analytical and Bioanalytical Chemistry Research, 2(2), 73-84. https://doi.org/10.22036/abcr.2015.10158
  18. Gebreslassie, Y. T. (2020). Equilibrium, kinetics, and thermodynamic studies of malachite green adsorption onto fig (Ficus cartia) leaves. Journal of Analytical Methods in Chemistry, 2020(7384675), 1-11. https://doi.org/10.1155/2020/7384675
  19. Ha, J. W., Japhe, T., Demeke, T., Moreno, B., & Navarro, A. E. (2019). On the removal and desorption of sulfur compounds from model fuels with modified clays. Clean Technologies, 1(1), 58-69. https://doi.org/10.3390/cleantechnol1010005
  20. Habeeb, O. A., Ramesh, K., Ali, G. A., Yunus, R. M., Thanusha, T. K., & Olalere, O. A. (2016). Modeling and optimization for H2S adsorption from wastewater using coconut shell based activated carbon. Australian Journal of Basic and Applied Science, 10(17), 136-147. http://umpir.ump.edu.my/id/eprint/17298/1/fkksa-2016-ramesh-Modeling%20and%20Optimization%20for%20H2S.pdf
  21. Hakimi M. S. M. S. Zaini, M. A. A., & Nasri, N. S. (2017). Isotherm studies of methylene blue adsorption onto waste tyre pyrolysis powder-based activated carbons Article history. Malaysian Journal of Fundamental and Applied Sciences, 13(4). 671-675. https://www.researchgate.net/publication/324407270_Isotherm_studies_of_methylene_blue_adsorption_onto_waste_tyre_pyrolysis_powder-based_activated_carbons
  22. Hiwarkar, A. D, Srivastava, V. C., & Mall I. D. (2015). Comparative studies on adsorptive removal of indole by granular activated carbon and bagasse fly ash. Environmental Progress & Sustainable Energy, 34(2), 492–503. https://doi.org/10.1002/ep.12025
  23. Iwanow, M., Gärtner, T., Sieber, V., & König, B. (2020). Activated carbon as catalyst support: Precursors, preparation, modification and characterization. Beilstein Journal of Organic Chemistry, 16, 1188-1202. https://www.beilstein-journals.org/bjoc/articles/16/104
  24. Jawad, A. H., Rashid, R. A., Ishak, M. A. M., & Wilson, L. D. (2016). Adsorption of methylene blue onto activated carbon developed from biomass waste by H2SO4 activation: kinetic, equilibrium and thermodynamic studies. Desalination and Water Treatment, 57(52), 25194-25206. https://doi.org/10.1080/19443994.2016.1144534
  25. Jeyakumar, R. P. S., & Chandrasekaran, V. (2014). Preparation and characterization of activated carbons derived from marine green algae Ulva fasciata sp. Asian Journal of Chemistry, 26(9), 2545-2549. https://doi.org/10.14233/ajchem.2014.15723
  26. Khalil, L. B., Girgis, B. S., & Tawfik, T. A. M. (2000). Porosity characteristics of activated carbons derived from olive oil wastes impregnated with H3PO4. Adsorption Science & Technology, 18(4), 373-383. https://journals.sagepub.com/doi/pdf/10.1260/0263617001493495
  27. Kolur, N. A.,, Sharifian, S., & Kaghazchi, T. (2019). Investigation of sulfuric acid-treated activated carbon properties. Turkish Journal of Chemistry, 43(2), 663–675. https://doi.org/10.3906/kim-1810-63
  28. Lee, S. H. D., Kumar, R., & Krumpelt, M. (2002). Sulfur removal from diesel fuel-contaminated methanol. In Separation and Purification Technology, 26(2-3), 247-258. https://www.sciencedirect.com/science/article/abs/pii/S1383586601001745
  29. Lesaoana, M., Mlaba, R. P. V., Mtunzi, F. M., Klink, M. J., Edijike, P., & Pakade, V. E. (2019). Influence of inorganic acid modification on Cr(VI) adsorption performance and the physicochemical properties of activated carbon. South African Journal of Chemical Engineering 28, 8-18. https://www.sciencedirect.com/science/article/pii/S1026918518300222?via%3Dihub
  30. Lopes, A. R., Scheer, A. de P., Silva, G. V., & Yamamoto, C. I. (2016). Pd-Impregnated activated carbon and treatment acid to remove sulfur and nitrogen from diesel. Matéria (Rio de Janeiro), 21(2), 407-415. https://doi.org/10.1590/S1517-707620160002.0038
  31. Mahmud, N. A., Osman, N., & Jani, A. M. M. (2018). Characterization of acid treated activated carbon from oil palm empty fruit bunches (EFB). Journal of Physics: Conference Series, 1083, 1-6. https://doi.org/10.1088/1742-6596/1083/1/012049
  32. Martínez-Mendoza, K. L., Barraza Burgos, J. M., Marriaga-Cabrales, N., Machuca-Martinez, F., Barajas, M. and Romero, M. (2020). Production and characterization of activated carbon from coal for gold adsorption in cyanide solutions. Ingeniería e Investigación, 40(1), 34-44. https://doi.org/10.15446/ing.investig.v40n1.80126
  33. Mkungunugwa, T., Manhokwe, S., Chawafambira, A., & Shumba, M. (2021). Synthesis and characterisation of activated carbon obtained from marula (Sclerocarya birrea) nutshell. Journal of Chemistry, 2021, 1-9. https://doi.org/10.1155/2021/5552224
  34. Mopoung, S., Moonsri, P., Palas, W., & Khumpai, S. (2015). Characterization and properties of activated carbon prepared from tamarind seeds by KOH activation for Fe(III) adsorption from aqueous solution. The Scientific World Journal, 2015. 1-9. https://doi.org/10.1155/2015/415961
  35. Muhammad, M. U., Hadi, B. A., & Abduljalil, M. M. (2021). Preparation of high surface area activated carbon from native rice husk. London Journal of Engineering Research, 21(3), 13-19. https://www.researchgate.net/profile/Abduljalil-Muhammad-Mode/publication/363700327_Preparation_of_High_Surface_Area_Activated_Carbon_from_Native_Rice_Husk/links/632ae6ed071ea12e364e226c/Preparation-of-High-Surface-Area-Activated-Carbon-from-Native-Rice-Husk.pdf
  36. Mühlen, C. V, Oliveira, D., Zini, C. A., Caramão, E. B., & Marriott, P. J. (2010). Characterization of nitrogen-containing compounds in heavy gas oil petroleum fractions using comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry. Energy and Fuels, 24(6), 3572-3580. https://doi.org/10.1021/ef1002364
  37. Nazal, M. K., Khaled, M., Atieh, M. A., Aljundi, I. H., Oweimreen, G. A., & Abulkibash, A. M. (2019). The nature and kinetics of the adsorption of dibenzothiophene in model diesel fuel on carbonaceous materials loaded with aluminum oxide particles. Arabian Journal of Chemistry, 12(8), 3678-3691. https://doi.org/10.1016/j.arabjc.2015.12.003
  38. Okhovat, A., Ahmadpour, A., Ahmadpour, F., & Yadegar, Z. K., (2012). Pore size distribution analysis of coal-based activated carbons: investigating the effects of activating agent and chemical ratio. ISRN Chemical Engineering, 2012, 1-10. https://doi.org/10.5402/2012/352574
  39. Olajire, A. A., Abidemi, J. J., Lateef, A., & Benson, N. U. (2017). Adsorptive desulphurization of model oil by Ag nanoparticles-modified activated carbon prepared from brewer’s spent grains. Journal of Environmental Chemical Engineering, 5(1), 147-159. https://doi.org/10.1016/j.jece.2016.11.033
  40. Oliveira, F. M. E., Vaz, B. G., Borba, C. E., Alonso, C. G. & Ostroski I. C. (2019). Modified activated carbon as a promising adsorbent for quinoline removal. Microporous and Mesoporous Materials, 277, 208-216. https://www.sciencedirect.com/science/article/abs/pii/S1387181118305675
  41. Owabor, C., & Iyaomolere, A. (2013). Evaluation of the influence of salt treatment on the structure of pyrolyzed periwinkle shell. Journal of Applied Sciences and Environmental Management, 17(2). 321-327. https://doi.org/10.4314/jasem.v17i2.15
  42. Pratumpong, P., & Toommee, S. (2016). Utilization of zinc chloride for surface modification of activated carbon derived from Jatropha curcas L. for absorbent material. Data in Brief, 9, 970-975. https://doi.org/10.1016/j.dib.2016.11.019
  43. Qu, D., Feng, X., Li, N., Ma, X., Shang, C., & Chen, X. D. (2016). Adsorption of heterocyclic sulfur and nitrogen compounds in liquid hydrocarbons on activated carbons modified by oxidation: Capacity, selectivity and mechanism. RSC Advances, 6(48), 41982-41990. https://doi.org/10.1039/c6ra06108g
  44. Ramutshatsha-Makhwedzha, D., Mavhungu, A., Moropeng, M. L., & Mbaya, R. (2022). Activated carbon derived from waste orange and lemon peels for the adsorption of methyl orange and methylene blue dyes from wastewater. Heliyon, 8(8), e09930. https://doi.org/10.1016/j.heliyon.2022.e09930
  45. Sahoo, T. R., & Prelot, B. (2020). Adsorption processes for the removal of contaminants from wastewater: the perspective role of nanomaterials and nanotechnology. Nanomaterials for the Detection and Removal of Wastewater Pollutants, Micro and Nano Technologies, 161-222. https://doi.org/10.1016/B978-0-12-818489-9.00007-4
  46. Sarker, M., An, H. J., & Jhung, S. H. (2018). Adsorptive Removal of Indole and Quinoline from Model Fuel over Various UiO-66s: Quantitative Contributions of H-Bonding and Acid-Base Interactions to Adsorption. The Journal of Physical Chemistry C, 122(8), 4532-4539. https://doi.org/10.1021/acs.jpcc.8b00761
  47. Seredych, M., Lison, J., Jans, U., & Bandosz, T. J. (2009). Textural and chemical factors affecting adsorption capacity of activated carbon in highly efficient desulfurization of diesel fuel. Carbon, 47(10), 2491–2500. https://doi.org/10.1016/j.carbon.2009.05.001
  48. Sharma, G., & Naushad, M. (2020). Adsorptive removal of noxious cadmium ions from aqueous medium using activated carbon/zirconium oxide composite: Isotherm and kinetic modelling. Journal of Molecular Liquids, 310, 113025. https://doi.org/10.1016/j.molliq.2020.113025
  49. Srivastava, V. C. (2012). An evaluation of desulfurization technologies for sulfur removal from liquid fuels. RSC Advances, 2, 759-783. https://doi.org/10.1039/c1ra00309g
  50. Suhdi, & Wang, S. C. (2021). Fine activated carbon from rubber fruit shell prepared by using zncl2 and koh activation. Applied Sciences, 11(9). 3994. https://doi.org/10.3390/app11093994
  51. Tan, I. A. W., Abdullah, M. O., Lim, L. L. P. & Yeo, T. H. C. 2017. Surface modification and characterization of coconut shell-based activated carbon subjected to acidic and alkaline treatments. Journal of Applied Science & Process Engineering, 4(2), 186-194. https://publisher.unimas.my/ojs/index.php/JASPE/article/view/435
  52. Thaligari, K. S., Gupta, S., Srivastava, V. C., & Prasad, B. (2018). Adsorptive desulfurization and denitrogenation by nickel impregnated activated carbon. Indian Journal of Chemical Technology, 25, 522-530. http://op.niscpr.res.in/index.php/IJCT/article/viewFile/16026/465464933
  53. Tsai, C. Y., Chiu, C. H., Chuang, M. W., & Hsi, H. C. (2017). Influences of copper(II) chloride impregnation on activated carbon for low-concentration elemental mercury adsorption from simulated coal combustion flue gas. Aerosol and Air Quality Research, 17(6), 1637-1648. https://doi.org/10.4209/aaqr.2016.10.0435
  54. Wang, L., Gao, Q., Li, Z., & Wang, Y. (2020). Improved removal of quinoline from wastewater using coke powder with inorganic ions. Processes, 8(2). 156. https://doi.org/10.3390/PR8020156
  55. Wang, Y., & Yang, R. T. (2007). Desulfurization of liquid fuels by adsorption on carbon-based sorbents and ultrasound-assisted sorbent regeneration. Langmuir, 23(7), 3825-3831. https://doi.org/10.1021/la063364z
  56. Wu, S. & Chen J. P. 2008. Modification of a commercial activated carbon for metal adsorption by several approaches. Indian Journal of Environmental Protection, 28(8), 673-675. https://www.researchgate.net/publication/287574842_Modification_of_a_commercial_activated_carbon_for_metal_adsorption_by_several_approaches
  57. Xu, H., Sun, X., Yu, Y., Liu, G., Ma, L., & Huang, G. (2019). Removal of quinoline using various particle sizes anthracite: Adsorption kinetics and adsorption isotherms. Physicochemical Problems of Mineral Processing, 55(1), 196-207. https://doi.org/10.5277/ppmp18121
  58. Yahya, M. A., Al-Qodah, Z., & Ngah, C. W. Z. (2015). Agricultural bio-waste materials as potential sustainable precursors used for activated carbon production: A review. Renewable and Sustainable Energy Reviews, 46, 218-235. https://doi.org/10.1016/j.rser.2015.02.051
  59. Yakub, I., Mohammad, M., & Yaakob, Z. (2013). Effects of zinc chloride impregnation on the characteristics of activated carbon produced from physic nut seed hull. Advanced Materials Research, 626, 751-755. https://doi.org/10.4028/www.scientific.net/AMR.626.751
  60. Yang, W., Cao, Y., Ni, X., Hunag, W., & Xu, W. (2015). Synthesis of a Denitrification Adsorbent with Large Surface Area and Specific Pore Structure for the Removal of Indole from Fuel Oil. Adsorption Science and Technology, 33(5):441-456. https://journals.sagepub.com/doi/pdf/10.1260/0263-6174.33.5.441
  61. Yusufu M. I. Ariahu, C. C., & Igbabul, B. D. (2012). Production and characterization of activated carbon from selected local raw materials. African Journal of Pure and Applied Chemistry, 6(9). 123-131. http://www.academicjournals.org/app/webroot/article/article1381242825_Yusufu%20et%20al.pdf
  62. Zhou, L., Li, M., Sun, Y., & Zhou, Y. (2001). Effect of moisture in microporous activated carbon on the adsorption of methane. Carbon, 39, 773-776. https://www.researchgate.net/publication/244317580_Effect_of_moisture_in_microporous_activated_carbon_on_the_adsorption_of_methane
  63. Zulkania, A., Hanum, G. F., & Rezki, A. S. (2018). The potential of activated carbon derived from bio-char waste of bio-oil pyrolysis as adsorbent. MATEC Web of Conferences, 154, 1-6. https://doi.org/10.1051/matecconf/201815401029

Last update:

No citation recorded.

Last update: 2024-10-12 16:10:08

No citation recorded.