1Laboratory of Petroleum, Gas and Coal, Department of Chemical Engineering, Faculty of Engineering,, Indonesia
2 Gadjah Mada University, Yogyakarta, Indonesia
BibTex Citation Data :
@article{IJRED7922, author = {Bardi Murachman and Dicky Pranantyo and Eddie Sandjaya Putra}, title = {Study of Gasohol as Alternative Fuel for Gasoline Substitution: Characteristics and Performances}, journal = {International Journal of Renewable Energy Development}, volume = {3}, number = {3}, year = {2014}, keywords = {gasoline; gasohol; fuel specifications; performance}, abstract = {Gasohol is a mixture of premium petrol (gasoline) with alcohol, in this case ethanol. The use of gasohol can reduce fuel consumption without having to modify the existing engine. Therefore, this research is conducted to study the characteristics and performance of gasohol in various mixing ratios, which includes analysis of physical properties and the use of gasohol in the machine. Results show that the addition of technical ethanol at 7.0169%v increases the value of gasohol vapor pressure on the value of 8.6682 psi (7.7 psi for regular gasoline). Gasohol with technical ethanol content above 30%v decreases vapor pressure, promotes phase separation, and causes a sharp drop in temperature from 40%v distillation. In term of corrosivity, gasohol with up to 50%v ethanol content has the same corrosion level with regular gasoline, which is corrosion level 1A. Based on gasohol characteristics test, it is known that gasohol with technical ethanol content below 20%v can be used as a fuel substitute for gasoline. Real-time performance test of gasohol in engines has shown that the addition of ethanol content in gasohol tend to increase the engine power at a certain compression ratio, but it also increases fuel consumption because the heat value of ethanol is lower than gasoline. Machine in gasohol with ethanol content below 20%v can operate smoothly without having to modify the engine. Based on the studies that have been done, gasohol in the range of 10%v ethanol content is well-functioned as a substitute for gasoline fuel and meets fuel specifications required by the General Director of Oil and Gas. The feasibility of using gasohol as an alternative fuel can be studied further.}, pages = {175--183} doi = {10.14710/ijred.3.3.175-183}, url = {https://ijred.cbiore.id/index.php/ijred/article/view/7922} }
Refworks Citation Data :
Article Metrics:
Last update:
Cellulose hydrolysis process of red dragon fruit pell (Hylocereus costaricensis) as candidate for bioethanol production
Effect of Compression Ratio on Performance and Emission Characteristics of Dual Spark Plug Ignition Engine Fueled With n-Butanol as Additive Fuel
THE VARIATIONS OF THE EXHAUST EMISSIONS AT LOW AMBIENT TEMPERATURE FOR E10 AND M10 FUELED SI ENGINE
Analysis of water-ethanol-gasoline (RON 88) compositions in one phase substance-using triangular graph
Study of the influence of alcohols addition to gasoline on the distillation curve, and vapor pressure
The effect of bioethanol addition on density and water content of gasohol
Artificial neural networks vs. gene expression programming for predicting emission & engine efficiency of SI operated on blends of gasoline-methanol-hydrogen fuel
Efficiency of Semi-Automatic Control Ethanol Distillation Using a Vacuum-Tube Parabolic Solar Collector
Last update: 2024-10-12 16:41:23
Bioethanol Producing Equipment Prototype Using Cassava Peel Using Microcontroller-Based Destilation Principles
Study of the composition, fuel parameter and triangular graph of a gasoline and aqueous ethanol fuel blend in a single phase
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge. Articles are freely available to both subscribers and the wider public with permitted reuse.
All articles published Open Access will be immediately and permanently free for everyone to read and download. We are continuously working with our author communities to select the best choice of license options: Creative Commons Attribution-ShareAlike (CC BY-SA). Authors and readers can copy and redistribute the material in any medium or format, as well as remix, transform, and build upon the material for any purpose, even commercially, but they must give appropriate credit (cite to the article or content), provide a link to the license, and indicate if changes were made. If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
International Journal of Renewable Energy Development (ISSN:2252-4940) published by CBIORE is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.