skip to main content

The Temperature Profile for The Innovative Design of the Perforated Fin

1University of Baghdad, Baghdad, Iraq

2Department of Mechanical Engineering, University of Gaziantep, 27310 Gaziantep,, Turkey

Published: 4 Nov 2016.
Editor(s): H Hadiyanto
Open Access Copyright (c) 2016 International Journal of Renewable Energy Development

Citation Format:
Abstract

The development of the perforated fin had proposed in many studies to enhance the heat transfer from electronic pieces. This paper presents a novel derivative method to find the temperature distribution of the new design (inclined perforated) of the pin fin. Perforated with rectangular section and different angles of inclination was considered. Signum Function is used for modeling the variable heat transfer area. Set of parameters to handle the conduction and convection area were calculated. Degenerate Hypergeometric Equation (DHE) was used for modeling the Complex energy differential equation and then solved by Kummer’s series. In the validation process, Ansys 16.0-Steady State Thermal was used. Two geometric models were considered. The big reliability of the presented model comes from the high agreement of the validation results about (0.25%). The results show the increase of the inclination leads to the enhancement of the temperature difference and heat transfer ratio. Improved of Heat transfer ratio is ranging from 13% to 50%.

Article History: Received June 12th 2016; Received in revised form August 6th 2016; Accepted August 24th 2016; Available online

How to Cite This Article: Jasim, H.H and Soylemez, M.S. (2016). The temperature profile for the innovative design of the perforated fin. Int. Journal of Renewable Energy Development, 5(3), 259-266

http://dx.doi.org/10.14710/ijred.5.3.259-266

Fulltext View|Download
Keywords: Inclined perforated, Temperature distribution, Signum function, Degenerate hypergeometric equation, Performance enhancement.
Funding: gaziantep university

Article Metrics:

  1. Andrei D. Polyanin and Valentin F. Zaitsev, 2003 . hand book of Exact solution for ordinary differential equations , 2nd ed (USA). By CHAPMAN & HALL/CRC , P.213-490
  2. Ashok Fule, A .M Salwe , A Zahir Sheikh, and Nikhil Wasnik, 2014. convective heat transfer comparison between solid and perforated pin fin, international journal of mechanical and robotics research, Vol. 3, No. 2, April
  3. Bayram Sahin, and Alparslan Demir, 2008a . Performance analysis of a heat exchanger having perforated square fins, Applied Thermal Engineering [ 28 (2008) 621–632]
  4. Bayram Sahin, and Alparslan Demir, 2008b. Thermal performance analysis and optimum design parameters of heat exchanger having perforated pin fins , Energy Conversion and Management [49(2008) 1684-1695]
  5. Elshafei .E. A. M, 2010. Natural Convection Heat Transfer from a Heat Sink with Hollow / Perforated-Circular Pin Fins, Energy [35 (2010) 2870e2877]
  6. Hazewinkel. M, 1995. Encyclopaedia of Mathematics: A-Integral — Coordinates, Springer science and business media, [p:105-110 and 797-800]
  7. Incropera, Dewitt, Bergman and Lavine , 2007. Fundamental of heat and mass transfer, John Wiley & Sons; 6th edition , [p:95-160 and 560-594]
  8. John W. Harris and Horst Stocker , 1998. Hand book of mathematics and computational science , springer (USA) [p:130-150]
  9. Kirpikov.V.A and Leifman.I.I, 1972. calculation of the temperature profile of a perforated fin, instituted of chemical apparatus design, Moscow. Vol.23, No.2, pp.316-321, August
  10. Mohamed L. Elsayed ,and Osama Mesalhy ,2014. Studying the performance of solid/perforated pin-fin heat sinks using entropy generation minimization , Heat Mass Transfer, [10.1007/s00231-014-1451-9]
  11. Mohammad Reza Shaeri, Tien-Chien Jen,2012. The effects of perforation sizes on laminar heat transfer characteristics of an array of perforated fins, Energy Conversion and Management 64 (2012) 328–334
  12. Monoj Baruah, Anupam Dewan and P. Mahanta, 2011. Performance of Elliptical Pin Fin Heat Exchanger with Three Elliptical Perforations, CFD Letters Vol. 3(2) [S2180-1363(11)3265-X]
  13. Raithby GD, and Hollands KGT,1998. Natural convection. In: Warren M. Rohsenow, James R Hartnett, Young I. Cho, Handbook of heat transfer, MCGRAW-HILL 3rd edition, [p:4-1 to 4-80]
  14. Saurabh D. Bahadure , and Gosavi , 2014. Enhancement of Natural Convection Heat Transfer from Perforated Fin, International Journal of Engineering research, Volume No.3, Issue No.9, pp : 531-535
  15. Swee-Boon Chin ,Ji-Jinn Foo, and Yin-Ling La , 2013. Forced convective heat transfer enhancement with-perforated pin fins, Heat Mass Transfer 49:1447–1458
  16. Zan WU, Wei LI, Zhi-jian SUN , and Rong-hua HONG, 2012. Modeling natural convection heat transfer from perforated plates, Journal of-Zhejiang University-SCIENCE A [13(5):353-360]

Last update:

  1. Thermal Enhancement from Pin Fins by Using Elliptical Perforations with Different Inclination Angles

    Hisham H. Jasim, Mehmet S. Söylemez. Heat Transfer—Asian Research, 47 (1), 2018. doi: 10.1002/htj.21297
  2. Optimization of a rectangular pin fin using elliptical perforations with different inclination angles

    Hisham H. Jasim, Mehmet Sait Söylemez. Journal of Mechanical Science and Technology, 31 (10), 2017. doi: 10.1007/s12206-017-0951-1

Last update: 2024-10-11 20:40:43

  1. Optimization of a rectangular pin fin using rectangular perforations with different inclination angles

    Jasim H.. International Journal of Heat and Technology, 35 (4), 2017. doi: 10.18280/ijht.350433
  2. Thermal Enhancement from Pin Fins by Using Elliptical Perforations with Different Inclination Angles

    Hisham H. Jasim, Mehmet S. Söylemez. Heat Transfer—Asian Research, 47 (1), 2018. doi: 10.1002/htj.21297
  3. Optimization of a rectangular pin fin using elliptical perforations with different inclination angles

    Hisham H. Jasim, Mehmet Sait Söylemez. Journal of Mechanical Science and Technology, 31 (10), 2017. doi: 10.1007/s12206-017-0951-1