1Department of Chemical Engineering, University of Jember, Jalan Kalimantan No. 37, Tegalboto, Jember 68121, Indonesia
2Faculty of Agriculture, Kyushu University, 744 Motooka Nishi-ku, Fukuoka 819-0395, Japan
3Bio-Architecture, Kyushu University, 744 Motooka Nishi-ku, Fukuoka 819-0395,, Japan
BibTex Citation Data :
@article{IJRED29986, author = {Rizki Darmayanti and Yukihiro Tashiro and Kenji Sakai and Kenji Sanomoto and Ari Susanti and Bekti Palupi and Meta Rizkiana}, title = {Biobutanol Production Using High Cell Density Fermentation in a Large Extractant Volume}, journal = {International Journal of Renewable Energy Development}, volume = {9}, number = {3}, year = {2020}, keywords = {biobutanol; high cell density; extraction; fermentation; large extractant volume}, abstract = { Biobutanol is well known as a suitable substitute for gasoline, which can be applied without engine modification. Butanol toxicity to the producer strain causes difficulties to grow strain of higher than 4 g/L dry cell weight and to produce butanol higher than 20 g/L. Fermentation using high initial cell density has been reported to enhance butanol productivity. In addition, oleyl alcohol has been recognized for effective extraction of butanol because of its selectivity and biocompatibility with reduced the effect of toxicity. Butanol fermentation with high cell density and large extractant volume has not been reported and is expected to improve butanol production in a minimum medium volume setting. Clostridium saccharoperbutylacetonicum N1-4, C. beijerinckii NCIMB 8052 (8052), and C. acetobutylicum ATCC 824 (824) were used in this study. Three kinds of media, TYA, TY, and TY-CaCO3, were used in this conventional extractive fermentation. Then, in situ extractive fermentation with Ve/Vb ratios at 0.1, 0.5, 1.0, and 10 were used. Total butanol concentration was defined as the broth-based total butanol, which is the total amount of butanol produced in broth and extractant per the volume of broth. TYA medium yielded the highest total butanol concentrations at N1-4 (12 g/L), 8052 (11 g/L), and 824 (15 g/L), and the highest partition coefficient (3.7) among the three media with similar Ve/Vb ratio at 0.5. N1-4 yielded the highest increment of total butanol production (22 g/L) in the extractive fermentation with high cell density. Low butanol concentration of 0.8 g/L in the broth was maintained using the extractant at a broth volume ratio (Ve/Vb) much lower than 4.4 g/L with a ratio of 0.5. Ve/Vb ratio of 10 which provided 2-fold higher total butanol concentration (28 g/L) than that of 11 g/L obtained using a Ve/Vb ratio of 0.5. These results indicated that a larger volume of extractant to broth improved total butanol concentration by reducing butanol toxicity and led to high medium based butanol yield in fermentation using high cell density. }, pages = {431--437} doi = {10.14710/ijred.2020.29986}, url = {https://ijred.cbiore.id/index.php/ijred/article/view/29986} }
Refworks Citation Data :
Article Metrics:
Last update:
Effect of Compression Ratio on Performance and Emission Characteristics of Dual Spark Plug Ignition Engine Fueled With n-Butanol as Additive Fuel
Biobutanol production from cocoa pod husk through a sequential green method: Depectination, delignification, enzymatic hydrolysis, and extractive fermentation
Last update: 2024-10-10 11:36:43
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge. Articles are freely available to both subscribers and the wider public with permitted reuse.
All articles published Open Access will be immediately and permanently free for everyone to read and download. We are continuously working with our author communities to select the best choice of license options: Creative Commons Attribution-ShareAlike (CC BY-SA). Authors and readers can copy and redistribute the material in any medium or format, as well as remix, transform, and build upon the material for any purpose, even commercially, but they must give appropriate credit (cite to the article or content), provide a link to the license, and indicate if changes were made. If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
International Journal of Renewable Energy Development (ISSN:2252-4940) published by CBIORE is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.