DOI: https://doi.org/10.61435/ijred.2026.61995
View PDF Download fulltext

Investigation of a PCM-based latent heat storage system combined with an adiabatic compressed air energy storage system in a renewable energy context

1Lebanese International University, School of Engineering, Mouseitbeh - PO Box: 146404, Mazraa, Beirut, Lebanon

2Saint Joseph University of Beirut, Faculty of Engineering, ESIB, P.O. Box 1514 – Riad El Solh, Beirut 1107 2050, Lebanon

3Lebanese University, Faculty of Engineering, P.O. Box 6573/14 – Badaro, Museum, Beirut, Lebanon

Received: 15 Nov 2025; Revised: 25 Jan 2026; Accepted: 4 Feb 2026; Available online: 15 Feb 2026; Published: 1 Mar 2026.
Editor(s): H Hadiyanto
Open Access Copyright (c) 2026 The Author(s). Published by Centre of Biomass and Renewable Energy (CBIORE)
Creative Commons License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Citation Format:
Abstract
The intermittent nature of renewables has increased the reliance on energy storage technologies to boost the efficiency and stability of power systems. Adiabatic Compressed Air Energy Storage (A-CAES) systems, which recover and reuse the heat generated during compression, have attracted significant attention in recent years. While A-CAES combined with thermal energy storage (TES) systems show promising potential, especially in renewable-integrated power systems, their commercial implementation remains limited, with only a few A-CAES power plants operating and which rely solely on sensible heat storage. The relatively low energy density of sensible heat storage opens the door to exploring latent heat storage (LHS) systems using Phase Change Materials (PCM’s), which could play a significant role in enhancing the performance of A-CAES systems. Although high-temperature PCM’s have demonstrated efficiency benefits in concentrated solar plants and energy-intensive industries, their integration into A-CAES systems requires further exploration. Accordingly, this paper aimed at simulating and assessing the performance of a combined A-CAES and PCM-based LHS system coupled to a gas turbine and an air turbine, alongside a wind farm. The simulations were conducted for charging durations ranging between 2 and 10 hours, with a fixed 2-hour discharge operation. The resulting fuel-saving efficiency in the gas turbine configuration improved with extended charging durations, ranging between 63.8 % and 66.1%. Furthermore, the exergetic roundtrip efficiency remains higher in the gas turbine configuration for charging durations shorter than 7 hours. Beyond this threshold, however, the air turbine configuration becomes more appealing when the combined CAES–LHS systems are coupled to it, exhibiting higher exergetic roundtrip performance under extended charging conditions. These findings, although theoretical in nature, could serve as a starting point for estimating the performance of the combined CAES-LHS systems and promoting their deployment into power generation applications in a renewable energy context.
Keywords: Wind Farm; Phase Change Materials; Adiabatic Compressed Air Energy Storage; Fuel-Saving Efficiency; Exergetic Roundtrip Efficiency

Article Metrics:

Article Info
Section: Original Research Article
Language : EN
Recent articles
Technology and equipment for bioethanol producing from plant waste Comparative study of Reynolds number and Flowrate effects on the thermal–hydraulic performance of corrugated channels with winglets using TiO₂ nanofluids Identification and comparison of pyrolysis products of different biomasses from agro-industrial using TGA-FTIR and Py-GC/MS More recent articles
Most cited articles
Implications of Charcoal Briquette Produced by Local Communities on Livelihoods and Environment in Nairobi- Kenya The Determinants Factors of Biogas Technology Adoption in Cattle Farming: Evidences from Pati, Indonesia MPPT Schemes for PV System under Normal and Partial Shading Condition: A Review Adaptation of VSC-HVDC Connected DFIG Based Offshore Wind Farm to Grid Codes: A Comparative Analysis Developing A Family-Size Biogas-Fueled Electricity Generating System More cited articles
  1. Anagnostopoulos, A., Navarro, M. E., Stefanidou, M., Ding, Y., & Gaidajis, G. (2021). Red mud-molten salt composites for medium-high temperature thermal energy storage and waste heat recovery applications. Journal of Hazardous Materials, 413, 125407. https://doi.org/10.1016/j.jhazmat.2021.125407
  2. Bashiri Mousavi, S., Adib, M., Soltani, M., Razmi, A. R., & Nathwani, J. (2021). Transient thermodynamic modeling and economic analysis of an adiabatic compressed air energy storage (A-CAES) based on cascade packed bed thermal energy storage with encapsulated phase change materials. Energy Conversion and Management, 243, 114379. https://doi.org/10.1016/j.enconman.2021.114379
  3. Becattini, V., Geissbühler, L., Zanganeh, G., Haselbacher, A., & Steinfeld, A. (2018). Pilot-scale demonstration of advanced adiabatic compressed air energy storage, Part 2: Tests with combined sensible/latent thermal-energy storage. Journal of Energy Storage, 17, 140–152. https://doi.org/https://doi.org/10.1016/j.est.2018.02.003
  4. Bloch, M. (2021, January 25). Compressed Air Energy Storage Project In SA Dumped. Solarquotes Blog. https://www.solarquotes.com.au/blog/hydrostor-caes-strathalbyn-mb1852/
  5. Burian, O., & Dančová, P. (2023). Compressed Air Energy Storage (CAES) and Liquid Air Energy Storage (LAES) Technologies—A Comparison Review of Technology Possibilities. Processes, 11(11). https://doi.org/10.3390/pr11113061
  6. COP28 UAE. (2023). Compressed Air Energy Storage Revival of a Proven, Economical Solution for Long Duration Energy Storage. https://www.cop28.com/en/schedule/compressed-air-energy-storage-revival-of-a-proven-economical-solution-for-long-duration-energy-st
  7. European Association for Storage of Energy (EASE). (2016). Adiabatic Compressed Air Energy Storage. Energy Storage Technology Descriptions. https://ease-storage.eu/wp-content/uploads/2016/03/EASE_TD_ACAES.pdf
  8. GAMS Development Corp./GAMS Software GmbH. (2024). The General Algebraic Modeling System (GAMS) (release 48.5.0 (December 20, 2024)). GAMS
  9. Geissbühler, L., Becattini, V., Zanganeh, G., Zavattoni, S., Barbato, M., Haselbacher, A., & Steinfeld, A. (2018). Pilot-scale demonstration of advanced adiabatic compressed air energy storage, Part 1: Plant description and tests with sensible thermal-energy storage. Journal of Energy Storage, 17, 129–139. https://doi.org/https://doi.org/10.1016/j.est.2018.02.004
  10. Ghorbani, B., Mehrpooya, M., & Ardehali, A. (2020). Energy and exergy analysis of wind farm integrated with compressed air energy storage using multi-stage phase change material. Journal of Cleaner Production, 259, 120906. https://doi.org/10.1016/j.jclepro.2020.120906
  11. Hydrostor. (2024). Goderich Energy Storage Centre. Hydrostor. https://hydrostor.ca/projects/the-goderich-a-caes-facility/
  12. International Renewable Energy Agency. (2025). Renewable Capacity Statistics 2025. https://www.irena.org/-/media/Files/IRENA/Agency/Publication/2025/Mar/IRENA_DAT_RE_Capacity_Statistics_2025.pdf
  13. International Renewable Energy Agency (IRENA). (2017). Electricity Storage and Renewables: Costs and Markets to 2030. www.irena.org/publications
  14. Jafarizadeh, H., Soltani, M., & Nathwani, J. (2020). Assessment of the Huntorf compressed air energy storage plant performance under enhanced modifications. Energy Conversion and Management, 209, 112662. https://doi.org/10.1016/j.enconman.2020.112662
  15. Jiang, R., Yin, H., Peng, K., & Xu, Y. (2019). Multi-objective optimization, design and performance analysis of an advanced trigenerative micro compressed air energy storage system. Energy Conversion and Management, 186, 323–333. https://doi.org/10.1016/j.enconman.2019.02.071
  16. Karam, T. (2025). Modeling & Performance Assessment of a Combined Adiabatic Compressed Air & Latent Heat Storage System Utilizing Phase Change Materials in a Renewable Energy Framework. PhD thesis, Saint Joseph University of Beirut
  17. Karam, T., Maatouk, C., & Al Sarraf, E. (in press). Simplified Analytical Formulation for Thermal Behavior Prediction of a PCM-based Heat Storage System. Contemporary Mathematics
  18. Kays, W. M., & London, A. L. (2018). Compact Heat Exchangers (Third Edition). Scientific International Pvt. Ltd
  19. Khan, M. I., Asfand, F., & Al-Ghamdi, S. G. (2022). Progress in research and technological advancements of thermal energy storage systems for concentrated solar power. Journal of Energy Storage, 55, 105860. https://doi.org/10.1016/j.est.2022.105860
  20. Li, D., Hu, Y., Li, D., & Wang, J. (2019). Combined-cycle gas turbine power plant integration with cascaded latent heat thermal storage for fast dynamic responses. Energy Conversion and Management, 183, 1–13. https://doi.org/10.1016/j.enconman.2018.12.082
  21. Li, Q., Li, C., Du, Z., Jiang, F., & Ding, Y. (2019). A review of performance investigation and enhancement of shell and tube thermal energy storage device containing molten salt based phase change materials for medium and high temperature applications. Applied Energy, 255, 113806. https://doi.org/https://doi.org/10.1016/j.apenergy.2019.113806
  22. Li, R., Wang, H., & Zhang, H. (2019). Dynamic simulation of a cooling, heating and power system based on adiabatic compressed air energy storage. Renewable Energy, 138, 326–339. https://doi.org/10.1016/j.renene.2019.01.086
  23. Li, R., Zhang, Y., Chen, H., Zhang, H., Yang, Z., Yao, E., & Wang, H. (2021). Exploring thermodynamic potential of multiple phase change thermal energy storage for adiabatic compressed air energy storage system. Journal of Energy Storage, 33, 102054. https://doi.org/10.1016/j.est.2020.102054
  24. Liu, T. L., Liu, W. R., & Xu, X. H. (2017). Properties and heat transfer coefficients of four molten-salt high temperature heat transfer fluid candidates for concentrating solar power plants. IOP Conference Series: Earth and Environmental Science, 93(1). https://doi.org/10.1088/1755-1315/93/1/012023
  25. Mehos, M., Turchi, C., Gomez-Vidal, J., Wagner, M., Ma, Z., Ho, C., Kolb, W., Andraka, C., & Kruizenga, A. (2017). Concentrating Solar Power Gen3 Demonstration Roadmap. https://docs.nrel.gov/docs/fy17osti/67464.pdf
  26. Milian, Y. E., Ushak, S., Cabeza, L. F., & Grageda, M. (2020). Advances in the development of latent heat storage materials based on inorganic lithium salts. Solar Energy Materials and Solar Cells, 208, 110344. https://doi.org/10.1016/j.solmat.2019.110344
  27. Mofijur, M., Mahlia, T. M. I., Silitonga, A. S., Ong, H. C., Silakhori, M., Hasan, M. H., Putra, N., & Ashrafur Rahman, S. M. (2019). Phase change materials (PCM) for solar energy usages and storage: An overview. Energies, 12(16). https://doi.org/10.3390/en12163167
  28. Moran, M., Shapiro, H., Boettner, D., & Bailey, M. (2020). Fundamentals of Engineering Thermodynamics (9th Edition). Wiley
  29. Murray, C. (2024, April 10). World’s largest’ compressed air energy storage project connects to the grid in China. Energy-Storage.News. https://www.energy-storage.news/worlds-largest-compressed-air-energy-storage-project-connects-to-the-grid-in-china/
  30. Peter Reinke. (2024). Email Correspondence with HBI Haerter AG on RICAS2020 project
  31. Prieto, C., & Cabeza, L. F. (2019). Thermal energy storage (TES) with phase change materials (PCM) in solar power plants (CSP). Concept and plant performance. Applied Energy, 254, 113646. https://doi.org/10.1016/j.apenergy.2019.113646
  32. Rabi, A. M., Radulovic, J., & Buick, J. M. (2023). Comprehensive Review of Compressed Air Energy Storage (CAES) Technologies. Thermo, 3(1), 104–126. https://doi.org/10.3390/thermo3010008
  33. REN21. (2024). Renewables 2024 Global Status Report – Renewables In Energy Demand. https://www.ren21.net/gsr-2024/
  34. RICAS. (2020). Design Study For The European Underground Research Infrastructure Related To Advanced Adiabatic Compressed Air Energy Storage. RICAS. https://www.ricas2020.eu/project/project-objectives/design-concept/
  35. Royo, P., Acevedo, L., Ferreira, V. J., García-Armingol, T., López-Sabirón, A. M., & Ferreira, G. (2019). High-temperature PCM-based thermal energy storage for industrial furnaces installed in energy-intensive industries. Energy, 173, 1030–1040. https://doi.org/10.1016/j.energy.2019.02.118
  36. Salvini, C. (2018). CAES systems integrated into a gas-steam combined plant: Design point performance assessment. Energies, 11(2). https://doi.org/10.3390/en11020415
  37. Shaw, V. (2024, May 16). World’s largest compressed air energy storage project comes online in China. Pv Magazine. https://www.pv-magazine.com/2024/05/16/worlds-largest-compressed-air-energy-storage-project-comes-online-in-china/
  38. Siemens Energy. (2025). SGT-400 gas turbine. https://www.siemens-energy.com/global/en/home/products-services/product/sgt-400.html#/
  39. Tawalbeh, M., Khan, H. A., Al-Othman, A., Almomani, F., & Ajith, S. (2023). A comprehensive review on the recent advances in materials for thermal energy storage applications. International Journal of Thermofluids, 18, 100326. https://doi.org/10.1016/j.ijft.2023.100326
  40. Tehrani, S. S. M., Taylor, R. A., Saberi, P., & Diarce, G. (2016). Design and feasibility of high temperature shell and tube latent heat thermal energy storage system for solar thermal power plants. Renewable Energy, 96, 120–136. https://doi.org/10.1016/j.renene.2016.04.036
  41. The Engineering Toolbox. (2025a). Combustion of Fuels - Carbon Dioxide Emission. https://www.engineeringtoolbox.com/co2-emission-fuels-d_1085.html
  42. The Engineering Toolbox. (2025b). Higher Calorific Values of Common Fuels: Reference & Data. https://www.engineeringtoolbox.com/fuels-higher-calorific-values-d_169.html
  43. US Environment Protection Agency (EPA). (2025). Greenhouse Gas Equivalencies Calculator. https://www.epa.gov/energy/greenhouse-gas-equivalencies-calculator
  44. Wang, P., Zhao, P., Xu, W., Wang, J., & Dai, Y. (2019). Performance analysis of a combined heat and compressed air energy storage system with packed bed unit and electrical heater. Applied Thermal Engineering, 162, 114321. https://doi.org/10.1016/j.applthermaleng.2019.114321
  45. Wang, S., Zhang, X., Yang, L., Zhou, Y., & Wang, J. (2016). Experimental study of compressed air energy storage system with thermal energy storage. Energy, 103, 182–191. https://doi.org/10.1016/j.energy.2016.02.125
  46. Zhang, X., Gao, Z., Zhou, B., Guo, H., Xu, Y., Ding, Y., & Chen, H. (2024). Advanced Compressed Air Energy Storage Systems: Fundamentals and Applications. Engineering, 34, 246–269. https://doi.org/10.1016/j.eng.2023.12.008
  47. Zhou, Q., Du, D., Lu, C., He, Q., & Liu, W. (2019). A review of thermal energy storage in compressed air energy storage system. Energy, 188, 115993. https://doi.org/10.1016/j.energy.2019.115993

Last update:

No citation recorded.

Last update: 2026-03-19 08:47:47

No citation recorded.