DOI: https://doi.org/10.61435/ijred.2026.62526
|  Research Instrument
Cover Letter
Subject
Type Research Instrument
  Download (45KB)    Indexing metadata

Experimental Investigation of a Wildlife-Safe Origami-Inspired Reaction-Type Wind Turbine for Sustainable Urban Energy Systems

1Department of Mechanical Engineering, College of Engineering, Australian University, Safat 13015, West Mishref, Kuwait, Kuwait

2Department of Electrical and Electronics Engineering, College of Engineering, Australian University, Safat 13015, West Mishref, Kuwait, Kuwait

3School of Aviation, Australian University, Safat 13015, West Mishref, Kuwait, Kuwait

4 Department of Civil Engineering, College of Engineering, Australian University, Safat 13015, West Mishref, Kuwait, Kuwait

View all affiliations
Received: 19 Mar 2026; Published: 28 Apr 2026.
Editor(s): H Hadiyanto
Open Access Copyright (c) 2025 The Author(s). Published by Centre of Biomass and Renewable Energy (CBIORE)
Creative Commons License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Citation Format:
Abstract

Small horizontal axis wind turbines offer environmentally sustainable solutions for distributed renewable energy generation in urban environments. However, their deployment is often limited by concerns related to noise, visual impact, and risks to flying wildlife. This study presents an experimental investigation of a novel origami-inspired wind turbine designed to improve environmental compatibility through a compact, aesthetic, and bladeless configuration that enhances safety for urban applications. Unlike conventional lift- or drag-based turbines, the proposed origami wind turbine operates using a reaction force generated by redirecting axial inlet airflow into tangential outlet flow through internal nozzle conduits. Two miniature prototypes were fabricated using 3D printing with rotor diameters of 10 cm and 8 cm, both designed with a nozzle aspect ratio of unity. The models incorporate four inlet openings with diameters of 3.5 cm and 2.8 cm, respectively. The environmental suitability and energy harvesting performance of the turbines were experimentally and theoretically evaluated under four operating conditions: free rotation, rotation with a generator without load, fixed load operation, and variable load operation. Performance was assessed in terms of cut-in wind speed, rotational speed, power output, and efficiency through wind tunnel testing. Results indicate that the bladeless origami design provides a promising environmentally conscious micro-wind solution for sustainable urban energy applications while maintaining competitive performance. The study demonstrates the potential of wildlife-safe and compact turbine designs to support environmentally responsible renewable energy integration in sustainable cities.

Note: This article has supplementary file(s).

Keywords: Environmental engineering; Small wind turbine; Sustainable cities; Wildlife safety; Renewable energy; Urban sustainability

Article Metrics:

Article Info
Section: Original Research Article
Language : EN
Recent articles
Economic growth and renewable energy consumption in Asia: Does good governance mitigate the trade-off? Impact of Development and Application of Advanced Technology on Labor Productivity and Energy Management Efficiency in Vietnam CFD Analysis of Photovoltaic Panel Performance under Variable Weather Conditions with Natural and Forced Convective Cooling Development of Hybrid COA-WCA Multi-Objective Optimization of Microgrid Hybrid Renewable Energy System: A Case Study of Nusa Penida Economic Environmental Optimization in Multiple Renewable Energy Sources with Demand Response based on Multi-Objective Optimization Algorithm More recent articles
Most cited articles
Thermodynamic Model of a Very High Efficiency Power Plant based on a Biomass Gasifier, SOFCs, and a Gas Turbine A Novel Global MPP Tracking of Photovoltaic System based on Whale Optimization Algorithm Thermal Performance Improvement of the Heat Pipe by Employing Dolomite/Ethylene Glycol Nanofluid The Temperature Profile for The Innovative Design of the Perforated Fin Enhancement of Energy Efficiency and Food Product Quality Using Adsorption Dryer with Zeolite More cited articles
  1. Tayebi, A., Torabi, F.: Flow control techniques to improve the aerodynamic performance of Darrieus vertical axis wind turbines: A critical review. Journal of Wind Engineering and Industrial Aerodynamics, 2024, 252, 105820. doi: https://doi.org/10.1016/j.jweia.2024.105820
  2. Rolin, V.F., Porté-Agel, F.: Experimental investigation of vertical-axis wind-turbine wakes in boundary layer flow. Renewable Energy, 2018, 118, pp. 1-13. doi: https://doi.org/10.1016/j.renene.2017.10.105
  3. Dossena, V., Persico, G., Paradiso, B., Battisti, L., Dell'Anna, S., Brighenti, A., Benini, E.: An experimental study of the aerodynamics and performance of a vertical axis wind turbine in a confined and unconfined environment. Journal of Energy Resources Technology, 2015, 137(5), 051207. doi: https://doi.org/10.1115/1.4030448
  4. Ahmadi-Baloutaki, M., Carriveau, R., Ting, D.S.: A wind tunnel study on the aerodynamic interaction of vertical axis wind turbines in array configurations. Renewable Energy, 2016, 96, pp. 904-913. doi: https://doi.org/10.1016/j.renene.2016.05.060
  5. Eboibi, O., Danao, L.A.M., Howell, R.J.: Experimental investigation of the influence of solidity on the performance and flow field aerodynamics of vertical axis wind turbines at low Reynolds numbers. Renewable Energy, 2016, 92, pp. 474-483. doi: https://doi.org/10.1016/j.renene.2016.02.028
  6. Maeda, T., Kamada, Y., Murata, J., Shimizu, K., Ogasawara, T., Nakai, A., Kasuya, T.: Effect of solidity on aerodynamic forces around straight-bladed vertical axis wind turbine. Renewable Energy, 2016, 96, pp. 928-939. doi: https://doi.org/10.1016/j.renene.2016.05.064
  7. Elkhoury, M., Kiwata, T., Aoun, E.: Experimental and numerical investigation of a three-dimensional vertical-axis wind turbine with variable pitch. Journal of Wind Engineering and Industrial Aerodynamics, 2015, 139, pp. 111-123. doi: https://doi.org/10.1016/j.jweia.2015.01.004
  8. Peng, H., Lam, H., Lee, C.: Investigation into the wake aerodynamics of a five straight-bladed vertical axis wind turbine. Journal of Wind Engineering and Industrial Aerodynamics, 2016, 155, pp. 23-35. doi: https://doi.org/10.1016/j.jweia.2016.05.003
  9. Joo, S., Choi, H., Lee, J.: Aerodynamic characteristics of two-bladed H-Darrieus at various solidities and rotating speeds. Energy, 2015, 90, pp. 439-451. doi: https://doi.org/10.1016/j.energy.2015.07.078
  10. Danao, L.A., Eboibi, O., Howell, R.: An experimental investigation into the influence of unsteady wind on the performance of a vertical axis wind turbine. Applied Energy, 2013, 107, pp. 403-411. doi: https://doi.org/10.1016/j.apenergy.2013.02.012
  11. Bausas, M.D., Danao, L.A.M.: The aerodynamics of a camber-bladed vertical axis wind turbine in unsteady wind. Energy, 2015, 93, pp. 1155-1164. doi: https://doi.org/10.1016/j.energy.2015.09.060
  12. Wang, Y., Tong, H., Sima, H., Wang, J., Sun, J., Huang, D.: Experimental study on aerodynamic performance of deformable blade for vertical axis wind turbine. Energy, 2019, 181, pp. 187-201. doi: https://doi.org/10.1016/j.energy.2019.03.181
  13. Han, Z., Chen, H., Chen, Y., Su, J., Zhou, D., Zhu, H., Xia, T., Tu, J.: Aerodynamic performance optimization of vertical axis wind turbine. Sustainable Energy Technologies and Assessments, 2023, 57, 103250. doi: https://doi.org/10.1016/j.seta.2023.103250
  14. Tong, G., Yang, S., Li, Y., Feng, F.: “Effects of blade tip flow on aerodynamic characteristics of straight-bladed vertical axis wind turbines,” Energy, 2023, 283, 129105. doi: https://doi.org/10.1016/j.energy.2023.129105
  15. Lee, Y.-T., Lim, H.-C.: “Numerical study of the aerodynamic performance of a 500 W Darrieus-type vertical-axis wind turbine,” Renewable Energy, 2015, 83, pp. 407–415. doi: https://doi.org/10.1016/j.renene.2015.04.043
  16. Castellani, F., Astolfi, D., Becchetti, M., Berno, F., Cianetti, F., Cetrini, A.: “Experimental and numerical vibrational analysis of a horizontal-axis micro-wind turbine,” Energies, 2018, 11(2), 456. doi: https://doi.org/10.3390/en11020456
  17. Castellani, F., Astolfi, D., Natili, F., Mari, F.: “The yawing behavior of horizontal-axis wind turbines: A numerical and experimental analysis,” Machines, 2019, 7(1), 15. doi: https://doi.org/10.3390/machines7010015
  18. Ajirlo, K.S., Tari, P.H., Gharali, K., Zandi, M.: “Development of a wind turbine simulator to design and test micro HAWTs,” Sustainable Energy Technologies and Assessments, 2021, 43, 100900. doi: https://doi.org/10.1016/j.seta.2020.100900
  19. Rahmatian, M.A., Tari, P.H., Mojaddam, M., Majidi, S.: “Numerical and experimental study of the ducted diffuser effect on improving the aerodynamic performance of a micro horizontal axis wind turbine,” Energy, 2022, 245, 123267. doi: https://doi.org/10.1016/j.energy.2022.123267
  20. Vaz, J.R., Wood, D.H.: “Aerodynamic optimization of the blades of diffuser-augmented wind turbines,” Energy Conversion and Management, 2016, 123, pp. 35–45. doi: https://doi.org/10.1016/j.enconman.2016.06.015
  21. Siavash, N.K., Najafi, G., Hashjin, T.T., Ghobadian, B., Mahmoodi, E.: “An innovative variable shroud for micro wind turbines,” Renewable Energy, 2020, 145, pp. 1061–1072. doi: https://doi.org/10.1016/j.renene.2019.06.098
  22. Hsiao, F.-B., Bai, C.-J., Chong, W.-T.: “The performance test of three different horizontal axis wind turbine (HAWT) blade shapes using experimental and numerical methods,” Energies, 2013, 6(6), pp. 2784–2803. doi: https://doi.org/10.3390/en6062784
  23. Gaonkar, R.U., Hegde, R.N.: “An investigation on the performance and viability of a hybrid twisted blade profile for a horizontal axis micro wind turbine,” Materials Today: Proceedings, 2022, 49, pp. 1200–1209. doi: https://doi.org/10.1016/j.matpr.2021.06.288
  24. Shuwa, M., Ngala, G., El-jummah, A.: “Performance analysis of horizontal axis wind turbine using variable blade pitch control mechanism,” Arid Zone Journal of Engineering, Technology and Environment, 2020, 16(1), pp. 179–187. URL: https://www.ajol.info/index.php/azojete/article/view/242581
  25. Direct PDF: https://www.ajol.info/index.php/azojete/article/download/242581/229401 GUNT Hamburg: “HM 170 Open wind tunnel.” URL:
  26. Çengel, Y.A., Cimbala, J.M.: Fluid Mechanics: Fundamentals and Applications. Publisher page: https://www.mheducation.com/highered/product/fluid-mechanics-fundamentals-applications-cengel.html
  27. Ohya, Y., Karasudani, T., Sakurai, A., Abe, K.-i., Inoue, M.: “Development of a shrouded wind turbine with a flanged diffuser,” Journal of Wind Engineering and Industrial Aerodynamics, 2008, 96(5), pp. 524–539. doi: https://doi.org/10.1016/j.jweia.2008.01.006
  28. Manwell, J.F., McGowan, J.G., Rogers, A.L.: Wind Energy Explained: Theory, Design and Application, 2nd ed., Wiley, 2010. Book doi: https://doi.org/10.1002/9781119994367

Last update:

No citation recorded.

Last update: 2026-05-01 05:31:55

No citation recorded.